Viber M2 Machine Protector

The Viber M2™ is a versatile, reliable and easy to use machine protector unit. The Viber M2 can give an alarm or stop the machine if failure is imminent. The M2 can beinterfaced with a PLC transmitting machine vibration information as well as transducer and cable condition to the PLC.

Category:

Scroll down for further information and specifications

SUBMIT AN ENQUIRY BELOW

Description

Viber M2 – 1 or 2 Channel Machine Protector

The Viber M2™ is a versatile, reliable and easy to use machine protector unit. The Viber M2 can give an alarm or stop the machine if failure is imminent. The M2 can beinterfaced with a PLC transmitting machine vibration information as well as transducer and cable condition to the PLC.

Specifications

Each channel has:
Three measuring ranges, 0-10, 0-20, 0-100mm/s.

Two independent alarm levels with manual or auto reset.

Two frequency ranges. 1,5 – 2000Hz or 10 – 2000Hz 4- 20 mA

Current output proportional to the overall vibration for connection to a PLC.

Monitoring of transducer and cable failure.

Use standard 100mV/g ICP type accelerometers.

Analysis signal from BNC connector on the front as well as from the terminal output.

Common for both channels:

Two independent change over relays

Two independent time delays of relay function

One changeover relay for transducer or cable fault

Enclosure

4- 20 mA Sealed (IP65), PVC box with transparent lid for overview of vibration and/or temperature levels, alarm settings and alarm status.

Downloads

M2+Datasheet+2014