E950-B – Large Bore Alignment System

Bore and Straightness Alignment:  250 -1200mm diameter

We offer three versions...


Bore and Straightness Alignment:  250 -1200mm diameter

We offer three versions of the measurement system, but the Easy-Laser® E950-B is primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.  See system content further down the page. You can also add accessories from Easy Laser E950A and Easy Laser E950C for a more versatile system

The Easy-Laser® E950 laser alignment system makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to simple operation. The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. You can then evaluate the results directly on-site with different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is the check of ovality, for example, to analyse the wear rate. The measurement system takes care of all these complicated calculations for you. You measure and align both full and half bearing journals with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability, and measure with a resolution of 0.001 mm. Measurement distance up to 40 m. Easy-Laser® E950 is suitable for use both in production and out in the field.

Also straightness of shafts and coupling alignment
With the systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train on the market. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.



1 Laser transmitter D75
1 Detector E7
1 Display unit
1 Bluetooth unit
1 Cable 2 m
1 Cable 5 m extension
1 Offset hub for D75
1 Transmitter bracket for stern tube
1 Set of rods 4 x 60mm
1 Set of rods 4 x 120mm
1 Self centering detector bracket,
1 Large target
1 Set of rods 2 x 30mm
1 Set of rods 2 x 240mm
1 Manual
1 Measuring tape 5 m
1 USB memory stick
1 USB cable
1 Battery charger 240 VAC
1 Toolbox
1 Shoulder strap for display unit
1 Cleaning cloth for optics
1 CD with documentation
1 Large Carrying case