XT440

With Generation XT you decide if you want the rugged and user-friendly Easy-Laser XT11 display unit to be included or not. The software is app-based and it also runs on your iOS or Android device, be it a tablet or a phone.

Scroll down for further information and specifications

SUBMIT AN ENQUIRY BELOW

Description

Easy-Laser XT440

With the Easy-Laser XT440 Dual Laser Shaft Alignment System you decide if you want the rugged and user-friendly Easy-Laser XT11 display unit to be included or not. The software is app-based and it also runs on your iOS or Android device, be it a tablet or a phone.

A large 8″, glove-enabled touch-screen makes the information clear and the app easy to use. The Xt440 display is robust with a rubber coated design ensure an IP66/67 rating. It has a battery life of 16 hours.

A small OLED display on the display unit shows battery status of both measuring units and display unit. You can check battery status also when the unit is turned off. The clever lock-screen button prevents unintentional clicks, for instance when moving between work positions.

An optional IR Camera for thermal images can be added for before and after pictures and shown in the report as well. The same applies to the Digital camera with 16 MPixels.

For the PDF report you have two standard layouts to choose from, but you can also design your own thanks to the fact that the measurements are also saved as Excel files.

MEASURING UNITS XT40-M / XT40-S

The XT440 measuring units have large 30mm PSD, and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.

The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times of up to 24 hours. Built-in Bluetooth wireless technology.

XT280 Vibration Probe

The XT280 automatically performs vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness. The direct readout of 1x, 2x, 3x RPM, total level as well as bearing condition provides necessary information during installation and alignment. The XT280 can show a Spectrum on the device itself and it is able connect to the XT440 Alignment App on your phone, tablet or the XT11 display unit, making it possible to document the result and generate a report.

See our other shaft Alignment products here.

Easy Laser System comparison rev3.

Read more about our Digital Belt Alignment Tools here.

XT280 Vibration Probe

XT280 Vibration Probe

The XT280 automatically performs vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness. The direct readout of 1x, 2x, 3x RPM, total level as well as bearing condition provides necessary information during installation and alignment. The XT280 can show a Spectrum on the device itself and it is able connect to the XT440 Alignment App on your phone, tablet or the XT11 display unit, making it possible to document the result and generate a report.

XT280 – What is in the Case

  • 1 Vibration meter
  • 1 USB memory stick with documentation
  • 1 Carrying case, WxHxD: 270x225x80 mm

System Specs

 

XT 280 Vibration meter

 

 

Frequency range 2 Hz to 1kHz (ISO) 1 kHz to 10 kHz (BDU)
Max frequency resolution 1.25 Hz @ 800 lines FFT setting
Displayed amplitude units Acceleration in g
Velocity in mm/s
Bearing noise in BDU (bearing damage units)
Displayed Frequency Units Hertz (Hz), RPM or CPM
Input range User selectable with accelerometer sensitivity
Dynamic range  96 dB (0.01g resolution)
VA diagnostic bands Unbalance 1x RPM
(RPM=run speed) Alignment 2x RPM
Looseness 3x RPM
Operating temperature 0°C to 50°C
Storage temperature  -20°C to 70°C
Battery type 2 x AA batteries
Battery operation 20 hours continuously (depending on brightness setting)
Environmental protection IP67
Material ABS plastics / Hard anodized aluminium
Dimensions  WxHxD: 200 mm x 60mm x 26mm
Weight 280 g

Downloads

XT280_brochure

System Parts

The Easy-Laser® XT440 Shaft kit has two options. With or Without Display Unit.

Part No. 12-0966 is without display unit (please provide your own tablet – iOs or Android). Basic kit has same specs as below.

The Easy-Laser® XT440 Shaft with Display unit XT11, Part No. 12-0967 includes:

1        Display unit XT11

1        Measuring unit XT40-M

1        Measuring unit XT40-S

2        Shaft brackets with chains and rods

4        Rods 60 mm

1        Measuring tape 3 m

1        Rod tightening tool

1        Charger (100–240 V AC)

1        DC split cable for charging

1        DC to USB adapter, for charging

1        Quick reference manual

1        Cleaning cloth for optics

1        USB memory with manuals

1        Carrying case Small (335x280x130 mm, 3.8 kg)

XT280

  • 1 Vibration meter
  • 1 USB memory stick with documentation
  • 1 Carrying case, WxHxD: 270x225x80 mm

 

Specifications

Display

Name XT11
Type of display/size VGA 8” colour screen, backlit LED, multi-touch
Internal battery (fixed) Heavy duty Li Ion chargeable
Connections USB A, USB B, Charger, AV (optional)
Operating temperature -10–50 °C
Storage temperature -20–50 °C
Wireless communication Wireless technology, WiFi
Relative humidity 10–95%
OLED display 96×96 pixels
Camera, with diode lamp 13 Mp
IR camera (optional) FLIR LEPTON® Long Wave Infrared
Help functions Built-in manual
Environmental protection IP class 66 and 67
Housing material PC/ABS + TPE
Dimensions WxHxD: 274x190x44 mm
Weight (without batteries) 1450 g
Operating time Up to 16 hours continuously

 

Measuring Units

Name XT40-M / XT40-S
Wireless communication Bluetooth® wireless technology
Type of detector True PSD 30 mm
Resolution 0.01 mm
Measuring errors <1%
Measurement range Up to10 m
Type of laser Diode laser
Laser wavelength 630–680 nm
Laser class Safety class 2
Laser output <1 mW
Electronic inclinometer 0.1° resolution
Environmental protection IP class 66 and 67
Operating temperature -10–50 °C
Storage temperature -20–50 °C
Relative humidity 10–95%
OLED display 128×64 pixels
Housing material Anodized aluminium + PC/ABS + TPE
Dimensions WxHxD: 76×76.7×39.3 mm
Weight 245 g
Operating time >24 h continuously
 

XT 280 Vibration meter

Frequency range 2 Hz to 1kHz (ISO) 1 kHz to 10 kHz (BDU)
Max frequency resolution 1.25 Hz @ 800 lines FFT setting
Displayed amplitude units Acceleration in g
Velocity in mm/s
Bearing noise in BDU (bearing damage units)
Displayed Frequency Units Hertz (Hz), RPM or CPM
Input range User selectable with accelerometer sensitivity
Dynamic range  96 dB (0.01g resolution)
VA diagnostic bands Unbalance 1x RPM
(RPM=run speed) Alignment 2x RPM
Looseness 3x RPM
Operating temperature 0°C to 50°C
Storage temperature  -20°C to 70°C
Battery type 2 x AA batteries
Battery operation 20 hours continuously (depending on brightness setting)
Environmental protection IP67
Material ABS plastics / Hard anodized aluminium
Dimensions  WxHxD: 200 mm x 60mm x 26mm
Weight 280 g

Downloads

XT440_brochure

XT280_brochure

XT190_brochure