Viber A

If you want to know how much your machine is vibrating and you want to know the condition of the bearings in the machine - then you should choose the Viber-A Vibration analyzer. With the press of only two buttons, you will get all this information. Viber-A measures both vibrations and bearing condition. The Viber-A has a comprehensive manual describing how to interpret vibration - and bearing condition - levels as well as two methods for single plane balancing.

Features:

• RMS Value
• Wide Frequency Range
• Bearing Condition

This vibration monitoring instrument is ideal for control room and maintenance personnel.

Viber A Datasheet

Viber X2 / Viber X3

Basic Features:

• Accurate measurements for 3 selectable frequency ranges.
• Real-time measurement of the total vibration level and the Bearing Condition (BC), shown simultaneously.
• Headphone set with volume control and high pass filter for bearing noise detection. X3 Only
• Listening to bearing sound while comparing the displayed BC value. X3 Only
• Measurement units and measurement presentation may be selected by the user from the following list:
• g (RMS, Peak or P-P)
• mm/sec (RMS, Peak or P-P)
• μm (RMS, Peak or P-P)
• inch/sec (RMS, Peak or P-P)
• mils (RMS, Peak or P-P)
• Bearing Condition measurements in a wide frequency range (0, 5 - 30 kHz).
• Built-in infrared temperature sensor, units in °C. X3 only
• Bar indicator shows measurement stability.
• Fast and easy fault analysis displaying the largest amplitude peak frequency in CPM or Hz in main screen display.
• Large dynamic range of the vibration signal (up to 50 g).
• Low power consumption.
• High performance accelerometer.
• Clear vibration, temperature and danger alarms by red and yellow colour LED’s.
• Easy to understand and operate.
• Fast battery charging capability using an external charger, provided in the delivery.
• Advanced technology with DSP processor.
• Display with backlight.
• Several languages.
• Adjustable Auto-shut off for energy saving.
• Dust and waterproof, for rough use (IP 65).

Viber X2 Datasheet

Viber X3 Datasheet

X - Viber

This vibration analyzer and also vibration data collector is the first step to a well planned machine maintenance programme. The overall vibration level, temperature and RPM are measured on the same instrument providing a complete Predictive maintenance tool. Balancing, Spectrum measurement and Analysis are also possible with X-Viber.

• Route via X Trend software
• Overall Vibration level
• Envelope
• Bearing Condition Value
• Analysis
• Temperature
• Speed
• Off Route Spectrum
• Single Plane Balancing
• Spectrum in Route (option)

X Viber Datasheet

ENPAC 2500

As far as vibration monitoring equipment goes, the Enpac 2500 combines with the RSI Emonitor software forming a complete vibration monitoring system to create an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user.

The small, rugged, and light weight design makes it ideal for industrial environments. The 1/4VGA color LCD display allows for clear viewing in almost any light situation. Speed improvements through the addition of the latest chip design and co-processor for winCE environment.

2-Channel function option allows for advanced use of orbits, cross channel phase, simultaneous data collection and balancing. Modular design offers easy component add-on and future improvements.

• Rugged, light weight design, intuitive menus and context sensitive HELP make it easy to use
• 30% - 50% faster than previous Entek IRD models
• Designed to operate in harsh environments with a Mil 810 spec drop rating, IP65 sealing (dust and water proof) and operating temperature range from -10C to +50C
• Certified to operate in hazardous environments. Choose a model with CSA Class 1 Div 2 (groups A,B,C,D) or a model with ATEX Zone 0 certification.
• The scalable platform allows you to get the functionality you need whether you are an experienced analyst or just starting a Condition-based Maintenance program.
• Large, virtually unlimited memory capacity
• Supported by industry leading Emonitor™ software and global Rockwell Automation® Service & Support.

Enpac 2500 Datasheet

Viber X5

The Viber X5 is the latest handheld vibration instrument from VMI, Sweden. The family of Viber-A, Viber X2 and X3, X-Viber is extended with this state-of-the-art instrument. When combined with Spectra Pro software and the optional items added, one will have an instrument that is difficult to beat on price and performance.

Some of the main features are:

• 2 Accelerometers, 100 mV/g with magnets and cables standard
• Internal IR temperature meter for quick measurements while in route
• IP68 rugged carrying case for heavy industrial use
• Hand straps for both sides for comfortable use
• The following measurements are standard:
• One- and two- plane balancing, hardware kit extra
• Route based data collection from a list in Spectra Pro
• Multimeter, process parameters to capture with vibration data
• Data logger for long-term recording waiting for that transient event
• Coast- down/- up, Orbit for the advanced analyst
• Bearing condition, Amplitude and Phase for troubleshooting
• Envelope, Spectra, Waveform as standard for everyday analyses
• Envelope, Spectra, Waveform as standard for everyday analyses
• 2 year manufacturing warranty for complete peace of mind
• Listen to bearing noise while measuring with head phones.

Viber X5 Datasheet