Artesis AMT Toolkit

AMT (Asset Management and Energy Efficiency) Toolkit is a portable motor driven test equipment system which automatically generates a condition assessment report indicating existing faults, time to failure information, recommended corrective actions and the effects of faults on energy efficiency. This instrument is capable of monitoring three phase...

Category:

Scroll down for further information and specifications

SUBMIT AN ENQUIRY BELOW

Description

AMT (Asset Management and Energy Efficiency) Toolkit is a portable motor driven test equipment system which automatically generates a condition assessment report indicating existing faults, time to failure information, recommended corrective actions and the effects of faults on energy efficiency. This instrument is capable of monitoring three phase AC motors and generators of all sizes and power outputs.

The toolkit uses three current sensors and three voltage sensors and is easy to install. AMT Toolkit is a low voltage measurement device which uses secondary measurement circuits of medium and high voltage equipment. The test duration is approximately 30 minutes allowing for 8-12 tests to be performed in a day. The report is issued immediately at the end of the test, automatically, by the AMT Software.

Typical Fault Coverage:

  • Loose foundation/components
  • Unbalance/misalignment/coupling
  • Transmission Faults
  • Driven equipment faults
  • Bearing Faults
  • Rotor faults
  • Stator/insulation faults
  • Voltage unbalance
  • Current unbalance
  • Internal and external electrical faults

Process Faults detected:

  • High Energy consumption
  • Low Efficiency
  • Cavitation in pumps
  • Flow turbulence in fans, blowers
  • Filter and heat exchanger fouling
  • Lubrication
  • Oversize/ undersize motors

Electrical Parameters measured:

  • RMS values of voltages and currents
  • Frequency
  • Power factor
  • Active power
  • Reactive power
  • Total Harmonic Distortion
  • Harmonics up to 13th

Voltage and current balances

System Parts

The AMT toolkit contains:

  • Roller carry case, 550x 310 x 190 mm, 18 kg
  • Netbook with MS Windows with AMT software
  • Four sets of split-core current transformers
    • 400/5A, 300/5A, 200/5A, 100/5A, Class 1
  • Six voltage measurement cables with clips
  • Current measurement cable
  • Ethernet cable.

General specifications:

  • Frequency – 50Hz
  • System rated voltage 0.72/3kV
  • Isolation voltage 3 kV (1 minute)
  • Continuous current 1.2 x rated current

Downloads

AMT FAQs

AMT Sample Report

AMT Artesis Case Studies

AMT Datasheet