 |
HORIZONTAL: For the alignment of horizontal
machines by the 9–12–3 method. |
• |
• |
• |
• |
 |
SOFT FOOT: With this program you can check
that the machine is resting on all its feet. Shows which foot should be
corrected (if necessary). |
• |
• |
• |
• |
 |
THERMAL GROWTH: Compensation : Compensates
for difference in thermal growth between machines. Subfunction. |
• |
• |
• |
• |
 |
TOLERANCE CHECK: Checks the offset and angle
values in relation to selected tolerance. Shows graphically when the
alignment is within tolerance. Sub-function. |
• |
• |
• |
• |
 |
MEASUREMENT VALUE FILTER: Advanced
electronic filter for accurate results even in poor measuring conditions such
as air turbulence and high vibration. Sub-function. |
• |
• |
• |
• |
 |
EASY TURN™: For the alignment of horizontal
machines. Allows complete measurement with only 40° rotation of the shafts. |
|
• |
• |
• |
 |
CARDAN: Shows angular errors and adjustment
value on cardan-shaft-coupled/centre-offset machines. (Requires accessory
fixtures.) |
|
• |
• |
• |
 |
VERTICAL: For measurement of vertical and
flange-mounted machines. |
|
• |
• |
• |
 |
MACHINE TRAIN: For the alignment of between
two and ten machines in line (nine couplings). The entire alignment can be
followed live on the screen. |
|
• |
• |
• |
 |
REFLOCK™: Any pair of feet can be locked/set
as a reference. Sub-function. |
|
• |
• |
• |
 |
OFFSET AND ANGLE: Shows centre offset and
angular error between two shafts, for example. Also suitable for dynamic
measurements. |
|
• |
• |
• |
 |
VALUES: Shows live readings from S- and
M-unit. Can be used for shaft alignment, straightness measurement and dynamic
measurement. Up to four detectors can be connected in series and be zeroed
individually. |
|
• |
• |
• |
 |
VIBROMETER: Shows vibration level in “mm/s”
or “inch/s”, and bearing condition value in “g”. The measurement complies
with vibration standard ISO10816-3. (Requires accessory Vibrometer probe
D283.) |
|
|
• |
• |
 |
BTA DIGITAL: For alignment of belt and chain
drives. (Requires accessories BTA Digital transmitter and detector unit.) |
|
|
• |
• |
 |
STRAIGHTNESS: For quick and easy
straightness measurement with predefined measurement positions. For machine
foundations, shafts, bearing journals, machine tools, etc. Can handle up to
150 measuring points with two zero points. |
|
• |
|
• |
 |
STRAIGHTNESS PLUS: Versatile program with
advanced functions. Measurement points can be added, deleted or remeasured
anytime during the measurement. The reference line can be offset set. For use
as described above. |
|
|
|
• |
 |
FLATNESS: Program to measure flatness/twist
of (for example) machine foundations, machine tables, etc. Can handle up to
300 measuring points with three zero points. |
|
|
|
• |
 |
SQUARENESS: For measurement of squareness in
machines and installations. |
|
|
|
• |
 |
PARALEL ISM: For measurement of parallelism
between rolls, machine ends, etc. Can handle up to 150 rolls/measurement
objects. The base line or any roll may be used as a reference. Every object
can be individually named. |
|
|
|
• |
 |
PARALEL ISM PLUS: Versatile program with
advanced functions. Measurement objects can be added, deleted or remeasured
anytime during the measurement. Includes baseline measurement function. For
use as described above. |
|
|
|
• |
 |
SPINDLE DIRECTION: For measuring the
direction in which machine spindles in machine tools, drilling machines,
etc., point. |
|
|
|
• |
 |
CENTER OF CIRCLE: Used for straightness
measurement of bearing journals when the bore diameter varies. For example
diesel engines, propeller shaft installations, etc. |
|
|
|
• |
 |
CENTER OF CIRCLE PLUS: Versatile program
with advanced functions. Measurement points can be added, deleted or
remeasured anytime during the measurement. The reference line can be offset
set. For use as described above. |
|
|
|
• |
 |
HALF CIRCLE: Readings are taken at three
positions, for example 9, 6 and 3. Allows varying bore diameters. To be used
together with the Turbine system. |
|
|
|
• |
 |
HALF CIRCLE PLUS: Versatile program with
advanced functions. Measurement points can be added, deleted or remeasured
anytime during the measurement. The reference line can be offset set. For use
as described above. |
|
|
|
• |
 |
PLUMBLINE: With this program you can measure
plumb (vertical) and straightness of turbine and generator shafts, for
example. |
|
|
|
• |
 |
FLANGE: For flatness measurement of flanges
and circular planes, slewing ring bearings for example. Can measure up to 300
points, measurements can be taken on the inner and/or the outer circle. Three
zero points at 120° pitch are computed by the system. |
|
|
|
• |
