Easy-Laser® E915 Flange Spin

Measure with spinning laser. Evaluate directly in true 3D
See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient. The system includes laser transmitter D23 Spin with power rotating head. This is how it works in brief: The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as you do not have to align the beam for each new measurement position. You place the detector at the desired measurement points and register the reading by a push of a butt on. In principle, one person can perform the measurement themselves. It is then possible to generate a PDF report containing graphs and measurement data directly from the measurement system’s display unit. All information about the measurement object is documented.

A complete system contains:

1 Laser transmitter D23
1 Detector E5
1 Display unit
1 Bluetooth unit*
1 Cable 2 m
1 Cable 5 m (extension)
1 Cable support
1 Safety strap for laser transmitter
2 Targets for rough alignment

1 Magnet base with turnable head
1 Set of rods (6x60 mm, 6x120 mm)
1 Manual
1 Quick manual
1 Measuring tape 5 m
1 USB memory stick
1 USB cable
1 Battery charger (100–240 V AC)
1 Toolbox

1 Cleaning cloth for optics
1 EasyLink™ Windows® program (CD)
1 Carrying case
*Optional equipment

Easy-Laser® E915 - E910 Flange