Easy-Laser® E950-A – Bore Alignment Systems

Bore alignment with the highest reliability and precision
The Easy-Laser E950 makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to the simple operation. The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. One can then evaluate the results directly onsite with different calculation methods such as “Best fit around zero” and “Waviness”. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is the check of ovality to analyse the wear rate for example. Both full and half bearing journals are handled with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability with a resolution of 0.001 mm. Measurement distance isup to 40 m.

Easy-Laser E950-A and Easy-Laser E950-B
We offer two versions of the measurement system. Easy-Laser E950-A primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications. Positioning workpieces in machine tools is also an appropriate application.
Easy-Laser E950-B is primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.
The software, laser transmitter and detector are common to both systems, but the brackets differ. See system content further down the page.

Also straightness of shafts and shaft alignment
With these systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.

A COMPLETE E950-A SYSTEM CONTAINS:

Easy-Laser® E950-A – Bore Alignment Systems (1761 KB)

Easy-Laser® E950-B – Bore Alignment Systems

Bore alignment with the highest reliability and precision
The Easy-Laser E950 makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to the simple operation. The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. One can then evaluate the results directly onsite with different calculation methods such as “Best fit around zero” and “Waviness”. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is the check of ovality to analyse the wear rate for example. Both full and half bearing journals are handled with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability with a resolution of 0.001 mm. Measurement distance isup to 40 m.

Easy-Laser E950-A and Easy-Laser E950-B
We offer two versions of the measurement system. Easy-Laser E950-A primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications. Positioning workpieces in machine tools is also an appropriate application.
Easy-Laser E950-B is primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.
The software, laser transmitter and detector are common to both systems, but the brackets differ. See system content further down the page.

Also straightness of shafts and shaft alignment
With these systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.

A COMPLETE E950-B SYSTEM CONTAINS:

Easy-Laser® E950-B – Bore Alignment Systems (1761 KB)

Easy-Laser® E960-A – Turbine Alignment

Reliability and precision
The Easy-Laser E960 Turbine alignment systems make the measurement and adjustment work of diaphragms and bearings easier thanks to the wireless detector unit and measurement programs that guides one through the measurement process. All of the parts included in the systems are designed and built for the most demanding environments and easy setup on any machine. The versatile design solves the straightness measurement problems quickly and with precision for any kind of application. Objects up to 40m can be measured. The detector reads measurement values with a resolution of 0.001 mm.

Easy-Laser E960-A and Easy-Laser E960-B
The system comes in two versions. Easy-Laser E960-A has a measuring probe with a stroke of 10 mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines.
Easy-Laser E960-B has a measuring probe with a stroke of 60 mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content further down the page.

Versatile programs
The straightness programs of the E960 system are very versatile. You can add, remove and remeasure measurement points at any time during the measurement. Up to 999 points can be handled by the program. You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases. The measurement program includes many different methods for straightness measurements like1-point measurement, 4-point measurement, Multipoint measurement (also ovality measurements), 3-point measurement and 3-point measurement with arbitrary angles. Optionally a reference detector can be used to monitor the laser transmitter position at long distances.
Thanks to the large colour display with clear graphs and measurement data one can evaluate the result directly on site. Any point can be set as reference and one can set an offset to which the centre line will be recalculated. One can also calculate waviness (short and long) and best-fit for the points. The result can also be checked against a tolerance value. The measurement system takes care of all these complicated calculations.

A COMPLETE SYSTEM CONTAINS (E960-A):

Easy-Laser® E960-A – Turbine Alignment (1954 KB)

Easy-Laser® E960-B – Turbine Alignment

Reliability and precision
The Easy-Laser E960 Turbine alignment systems make the measurement and adjustment work of diaphragms and bearings easier thanks to the wireless detector unit and measurement programs that guides one through the measurement process. All of the parts included in the systems are designed and built for the most demanding environments and easy setup on any machine. The versatile design solves the straightness measurement problems quickly and with precision for any kind of application. Objects up to 40m can be measured. The detector reads measurement values with a resolution of 0.001 mm.

Easy-Laser E960-A and Easy-Laser E960-B
The system comes in two versions. Easy-Laser E960-A has a measuring probe with a stroke of 10 mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines.
Easy-Laser E960-B has a measuring probe with a stroke of 60 mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content further down the page.

Versatile programs
The straightness programs of the E960 system are very versatile. You can add, remove and remeasure measurement points at any time during the measurement. Up to 999 points can be handled by the program. You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases. The measurement program includes many different methods for straightness measurements like1-point measurement, 4-point measurement, Multipoint measurement (also ovality measurements), 3-point measurement and 3-point measurement with arbitrary angles. Optionally a reference detector can be used to monitor the laser transmitter position at long distances.
Thanks to the large colour display with clear graphs and measurement data one can evaluate the result directly on site. Any point can be set as reference and one can set an offset to which the centre line will be recalculated. One can also calculate waviness (short and long) and best-fit for the points. The result can also be checked against a tolerance value. The measurement system takes care of all these complicated calculations.

A COMPLETE SYSTEM CONTAINS (E960-B):

Easy-Laser® E960-B – Turbine Alignment (1954 KB)

Easy-Laser® E910 Flange

Evaluate directly in true 3D
See the result as a true 3D image in the display unit directly aft er measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient. The system includes laser transmitter D22 with manual rotatable head, and with the option of deflecting the laser beam 90°. With a few more accessories the system can also be used to check the parallelism of the two tower flanges. In the measurement system’s display unit it is possible to generate a PDF report containing graphs and measurement data. All information about the measurement object is documented.

A complete system contains:

Easy-Laser® E915 - E910 Flange

Easy-Laser® E915 Flange Spin

Measure with spinning laser. Evaluate directly in true 3D
See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient. The system includes laser transmitter D23 Spin with power rotating head. This is how it works in brief: The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as you do not have to align the beam for each new measurement position. You place the detector at the desired measurement points and register the reading by a push of a butt on. In principle, one person can perform the measurement themselves. It is then possible to generate a PDF report containing graphs and measurement data directly from the measurement system’s display unit. All information about the measurement object is documented.

A complete system contains:

Easy-Laser® E915 - E910 Flange

Easy-Laser® D640 Machine tool

For checking and aligning machine tools.
Easy-Laser® D640 Machine tool system is the market’s most complete measurement system for checking and aligning machine tools. The system can handle most tasks in this field, despite the fact that there is considerable variation in machine design: different types of lathe, milling machines, automatic drills, presses, water cutting machines etc. The most important thing to check is the geometry of the machine; straightness, spindle direction, flatness and squareness, because not even a precisely calibrated linear motion can compensate for a crooked movement or uneven surface. The correct machine geometry is the basis for being able to produce parts that remain within the tolerances. Compared to conventional methods, such as dial gauges, mandrels and stones, work can be carried out much more quickly with the use of a laser measurement system.

A complete system contains:

Easy-Laser® D640 Machine tool

Easy-Laser® D800 Machine Spin

Easier and faster flatness measuring
With this measurement system measurement and alignment ti mes can be shortened considerably. This is how it works in brief: The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. You place the detector at the desired measurement points and register the reading by a push of a butt on. If required,you can also read the measurement values “live” with up to four detectors connected in series, to see how the measurement object moves/turns at each measurement position during adjustment. Typical applications: Straightness and flatness of machine tables and bases, flatness of flanges, parallelism between press tables, plane parallelism between rails and rolls etc.

A complete system contains: 

Easy-Laser® D800 Machine

Easy-Laser® D670 Parallelism

For parallelism measurement
For parallelism measurement of rolls and stands in numerous applications. Any chosen object or the baseline can be used as a reference. You can also use the system to measure level, straightness and flatness on wire ends (suction boxes), flatness on bases and straightness on rolls. With a few accessories you can also perform shaft alignment. Typical applications for system D670 are papermaking machines, printing presses, rolling mills etc.

A complete system contains:

Easy-Laser® D670 Parallelism

Easy-Laser® D630 Extruder

For aligning extrusion machines
The system is designed to measure straightness and direction of pointing, primarily on extruder pipes. Another application can be hydraulic pipes for example. The well-thought-out design of the system ensures that the measurement procedure is quick and accurate. Diameters down to 42 mm can be measured (accessory detector available for diameters down to 20 mm).

A complete system contains:

Easy-Laser® D630 Extruder